A good festival signage plan starts with the site map, not the artwork. Walk the route as a first-time attendee, mark every point where someone has to make a choice, decide what each spot must say, and only then specify sizes, materials, lighting and print. Add the UK safety and permission checks early, because they change what you can put up and where.

This guide takes you through that process in order, from the layout walk to the final check before gates open. It is written for event managers, venue operators and marketing leads who have to brief a print supplier and sign off a scheme that works in mud, wind and darkness.

A3m
Make Festival Signage Clear and Durable
A3M produces bespoke signage and large format print for events, helping organisers bring wayfinding and festival branding to life.

Explore event print solutions

TL;DR

  • Plan signs from the site map and the attendee journey first, then choose designs, sizes and materials.
  • Safety and emergency signs must be visible, unobstructed, lit after dark and compliant with UK regulations. Sponsor branding goes elsewhere.
  • Anything on or near the public highway needs approval from the local highways authority, and temporary signs have strict timing limits.
  • Use weather-resistant materials, repeat critical signs, and keep text large, high-contrast and easy to read.
  • Walk the whole site before gates open, and again during the event, and record what you fix.

Table of Contents

Start with the site map and the attendee journey

Before anyone opens a design file, you need a map and a pair of boots. Festival signage guidance from Ticket Fairy advises identifying key locations and decision points on a site map in the early design phase, then walking the site from an attendee’s perspective to see where directional signs are needed between stages, amenities and exits.

A simple way to do it:

  1. List every facility and service from arrival to departure. Car parks, drop-off, ticket check, bag search, toilets, water, food, stages, first aid, welfare, information point, accessible viewing, taxi and shuttle points, exits.
  2. Rank the information. What does a visitor need in the first 30 seconds on site? What can wait until they are at the stage?
  3. Walk every route. Mark intersections, forks in paths, gate approaches and anywhere crowds will bunch. These are your decision points.
  4. Assign one job per sign. Each location gets a defined message: direct, inform, warn or identify.
  5. Walk it again at dusk. Daylight arrival and night-time exit are two different journeys.

The HSE’s Event Safety Guide is clear that for outdoor sites, signage design and location depend on the venue-specific layout, not on generic permanent-venue signs. Treat signage as part of crowd flow and emergency communication, not decoration.

Keep decisions on record

Signage plans pass through many hands: production, safety, sponsorship, the landowner, the print supplier. Decisions get lost between meetings. A disciplined habit of running a meeting parking lot and following it up keeps unresolved questions, such as who signs off the sponsor panel size, from surfacing the week before build.

What a festival needs signed

The list below is a working checklist, built from the HSE’s guidance and from the Victorian Government’s code of practice for music festivals (an Australian document, useful as a cross-check). That code says signs should cover first aid, toilets, drinking water, conditions of entry, parking, entrances and exits, and the event management centre.

For a UK music or outdoor festival, a practical scheme usually covers:

Zone Typical signs Purpose
Approach and parking Road-approach directional signs, car park zone and row markers, pedestrian route signs Reduce confusion before the gate
Entrance Conditions of entry, bag search, ticket and wristband lanes, accessible entrance Set expectations and speed up queues
Site core Map boards with a You Are Here marker, stage and zone identifiers, finger-post directional signs Orientation
Facilities Toilets, drinking water, first aid, welfare, lost children and information point, charging, accessible facilities Find essentials fast
Safety Exits, emergency routes, muster points, fire points, event control Emergency response
Commercial Sponsor banners, food and bar menus, merchandise, stage fronts Revenue and brand
Departure Exit routes, shuttle, taxi and station directions, last-entry notices Smooth egress

Do not forget schedules. Stage times change, so put them on panels designed for easy updating or on digital signs and displays in sheltered, powered locations.

Where to place signs so people can read them

Placement is where plans fail. A sign that is correct but hidden behind a crowd does nothing.

  • Height. Transport for London’s events signage standards state that all primary messages must be above head height, and that post-mounted signs should sit no lower than 2.5 metres above the ground. That standard was written for transport events, but the logic of reading over a crowd carries to a festival field.
  • Junctions. Put directional signs at intersections, forks in paths and entry and exit points, as Ticket Fairy’s infrastructure guidance recommends.
  • Repetition. For critical destinations such as first aid or exits, install more than one sign, so the route is still readable if one is blocked by a crowd or damaged.
  • Size. The HSE guide notes that larger venues generally need larger signs and suitable fixing points. Plan your fixings (fencing, posts, trussing, towers) alongside the sign sizes, not after.
  • Weight and wind. TfL notes that its freestanding signs are built to withstand UK winds, are very heavy and need special lifting equipment. A big freestanding sign is a build task, so schedule it as one.

For how this fits into a wider production schedule, our event management signage workflow guide breaks the stages down from brief to install.

Lighting: signs after dark

Most festivals are entered in daylight and left in darkness. The HSE lists poorly maintained or inadequately lit pedestrian routes, poor ground conditions and a lack of suitable entrances and exits among crowd-safety hazards to identify, and advises providing enough lighting where visitors arrive in daylight and leave after dark.

For signs, that means:

  • Exit and emergency signs must be clearly visible and lit in the dark.
  • Emergency lighting for escape routes must meet BS 5266-1 and run from an independent power source such as a generator, so it keeps working if the mains fail, according to HSE guidance on incidents and emergencies.
  • Reflective coatings or integrated lighting should be budgeted for any sign that must be read at night.
  • Illuminated signs and LED displays need suitable covers, enclosures or shelters in rain, and cables rated for adverse weather, per HSE electrical safety guidance.

If your plan includes powered signs, involve your electrical contractor when you set sign positions, not once the power plan is final.

UK rules to check before you print

This is the part that causes last-minute reprints. Check each item with the relevant body for your site and event.

Safety signs

Safety and emergency signs, such as exits and muster points, must be clearly visible, unobstructed and conform to the Health and Safety (Safety Signs and Signals) Regulations 1996, as the HSE guide sets out. Use the standard pictogram and colour conventions for these signs. Your own artistic treatment belongs on everything else.

Signs on or near the public highway

If approach signs go on the public highway, you need specific approval. Cheshire West and Chester Council’s event guidance says organisers must obtain approval from the local highways authority and that such signs must be displayed by authorised, competent personnel. The same guidance asks applicants to provide insurance and risk assessments at least six weeks before the event. Other councils set their own timescales, so ask yours early.

Timing limits for temporary signs

The Department for Transport’s Traffic Advisory Leaflet 04/11 says temporary signs should not normally go up more than 48 hours before an event and should not stay after it ends. That affects your install window and your strike plan. We cover the practical side in our guide to 48-hour compliance traps for temporary event signage.

Accessibility

VisitScotland’s guide for event organisers recommends a minimum 16-point sans-serif font such as Arial or Calibri, high-contrast text and symbols, and avoiding all-caps lettering. It also suggests considering Braille or raised lettering, and placing signs at heights that children and wheelchair users can see. It is Scottish guidance, but it is sensible practice for any UK site.

Five recommendations for accessible festival signage

A practical rule: print the text of your smallest sign at actual size and read it from the distance a person will really stand at, in poor light.

Materials and formats for mud, wind and rain

Festival signs live outdoors for days and get knocked, soaked and stood on. Ticket Fairy’s guidance suggests durable, weather-resistant signs such as laminated or waterproof boards, strong supports, and budgeting for lighting or reflective coatings on signs used after dark. Large map boards with a You Are Here marker should be weather-resistant and sited in high-traffic areas.

In practice, specify by job:

  • Banners and mesh. Stage fronts, fence wraps and perimeter branding. Mesh lets wind through, which matters on exposed sites. Ask your printer about hemming, eyelets and fixing spacing for the fence or truss you are using.
  • Rigid boards. Directional and information panels. Choose a weather-resistant substrate and a protective finish for anything that will be handled or leaned on.
  • Flags and feather banners. Good for wide-area orientation and zone colour-coding, but not a substitute for readable directional signs.
  • Map boards. Large format, laminated, mounted on a sturdy frame, with a clear key.
  • Digital panels. Best for changing schedules, in sheltered and powered spots only.

If your site needs large-scale production with consistent colour across banners, boards and wraps, large format print produced under one roof makes it easier to keep that consistent.

Branding and sponsors without losing clarity

Festival signs do two jobs, and they must not fight. Wayfinding keeps people safe and moving. Branding sells the event and pays for it.

The HSE guide’s approach, as the research reads it, points to a consistent colour and type system, pictograms where useful, a clear hierarchy with one primary message, and no more information on a sign than a visitor needs at that spot. Give sponsors their own banners, panels or defined secondary areas, rather than dense logos on safety, exit or directional signs. Essential signs should remain visible and lit after dark.

A workable approach:

  1. Define a core system. Two or three colours, one typeface, one pictogram set, applied to every directional and information sign.
  2. Colour-code zones (for example, campsite, arena, family area) so the colour confirms the direction.
  3. Create sponsor space on purpose. Stage backdrops, bar fronts, fence lines, entrance arches, map board sponsor strips.
  4. Keep sponsor logos off anything safety-critical.
  5. Agree proofing early. Sponsor artwork arrives late. Set a deadline and a sign-off route in your plan.

The same design language should carry through tickets, app, social posts and signs, so the site feels like the event people bought into.

Our view: treat the sign scheme as a production job

In our experience of print and signage production, the weak point in festival signage is rarely the design. It is the gap between the person who plans the site and the person who manufactures the signs. Sizes get guessed, fixings get forgotten, and sponsor artwork arrives after the print slot has gone.

That is why we like to work from the site plan outwards. Because we manufacture in-house, we can talk through formats, finishes and fixings with you while the plan is still flexible, keep colour consistent across banners, boards and wraps, and respond when a brief changes late. We also steer clients towards sustainable print options where they suit the job.

Our advice is to brief your print partner as soon as you have a draft site map, not when artwork is signed off. A sign schedule listing location, message, size, material, fixing and lighting need saves more time than any amount of design polish.

Steve

From plan to print: a sign schedule that works

Turn your site walk into a single spreadsheet, the sign schedule. Every row is one sign location. Columns:

  • Reference number and map grid
  • Message and pictogram
  • Sign type (banner, board, flag, map, digital)
  • Size and mounting height
  • Material and finish
  • Fixing method and who installs it
  • Lighting or power needed
  • Quantity, including repeats and spares
  • Install date, strike date
  • Approval needed (highways, landowner, sponsor, safety officer)

This document serves your printer, your install crew, your safety adviser and your landowner. Keep a few spares for the signs most likely to be damaged or stolen, and keep a small repair kit on site.

For a deeper look at how signs support the visitor’s experience across a whole journey, see our piece on the role of signage in the customer journey.

Checks before gates open and while you run

The Wigan Council guide for event organisers suggests a walk-through before opening to check that facilities are correctly sited, entrances and exits are clear, adequate signs are provided and lighting works. It also says to repeat inspections during the event, record defects and remedial action, and consider weather hazards and contingency plans for severe weather or loss of services. A festival planning checklist from Rent2Way likewise recommends a final walkthrough to verify that entry points, vendor zones, toilets and emergency exits are signed.

A simple pre-opening routine:

  1. Walk every attendee route in the order a visitor would, starting at the car park.
  2. Read each sign from a normal standing distance. Is it visible, legible and facing the right way?
  3. Check that nothing blocks an exit, route or safety sign: stalls, barriers, vehicles, sponsor structures.
  4. Test lighting and power at dusk, not just at midday.
  5. Confirm fixings against wind: ties, ballast, posts.
  6. Confirm that temporary road signs are authorised and within their timing limits.
  7. Log defects, who fixed them and when.

During the event, repeat the walk at set times each day and after any storm. Put one named person in charge of sign repairs, with a radio channel and a stock of spares.

Teardown and reuse

Once the event ends, temporary road signs come down promptly in line with the highway guidance above. For the rest, label and store reusable items, such as map frames, fence banners and flags, so they can be redeployed next year. Reusing the structural sign system and swapping the printed faces is often a good route to less waste, and it is a good question to ask your print supplier when you brief the project.

Promo: signage production for events

If you are planning a festival or outdoor event and want one team to handle the print side, we produce banners, boards, wraps, map panels and wayfinding systems from our own facilities, and can advise on formats and finishes for outdoor use. Start with our signage service or tell us about your site and timescales through the A3M homepage.

A3m

We would be happy to talk through your sign schedule with you and flag production questions early.

FAQ

When should I start planning festival signage?

Start as soon as you have a draft site layout, which is long before artwork. Signage should be treated as part of the site design from the beginning, so decision points and sign positions can shape the layout. Allow extra time if any signs need highways approval, as councils can ask for paperwork weeks ahead.

Do I need permission for signs on roads leading to my festival?

If the signs are on the public highway, yes. You need approval from the local highways authority, and the signs must be put up by authorised, competent people. Temporary signs should not normally go up more than 48 hours before the event and should be removed once it ends. Ask your local council for its process and timescales.

What font size should festival signs use?

VisitScotland’s inclusive events guidance recommends a minimum of 16-point sans-serif type, high-contrast colours and avoiding all-caps text. Directional signs read from a distance need to be much larger, so size them for the viewing distance at the real location, then test them in poor light.

How many signs does a festival need?

There is no standard number, because it depends on the site layout, the number of decision points and the size of the crowd. Build your count from the site walk: one defined job per location, plus repeats for critical destinations such as first aid and exits, plus spares for damage.

Can sponsors put their logos on directional signs?

It is better to keep them off safety, exit and directional signs and give sponsors their own banners, panels or secondary areas. That keeps essential messages quick to read while still giving sponsors good visibility around the site.

Sources

Privacy Preference Center